ENGINE SKID PLATE – NX300

The ultimate protection for your engine and transmission. Full protection from the rear cross member, all the way forward under the front core support to protect your radiator too. Available with access holes for engine oil and drain plug to allow easy servicing, or full plate with no holes for total skid protection (plate removal required for service).

Mounting is easy with 4 bolts, and no drilling required. To remove solid skid plate for service, removal is easy with just 4 nut and bolt removal—takes just 10 minutes or less.

Aluminum plates are 3/16” thick and weigh about 20 pounds. They have a light brush finish.

Steel plates are 1/8” thick and weigh about 32 pounds. They come in a bare steel finish without coating and will eventually rust—you can spray paint or powder coat to your desired finish, or just go patina style.

The aluminum and steel plates have similar strength due to differences in plate thickness.

All required mounting hardware is included.

Will work with stock exhaust–OR–gain over an inch of additional ground clearance with the use of our High Clearance Exhaust sold separately. Hardware included for both.

Contact us for shipping to other worldwide locations.

Canadian customers we recommend International Economy (Express Service) for lowest overall cost and fastest service. For more info see SHIPPING INFO.